Log-In, Inc.


xlTRANSFER direct sale is discontinued. Sales only via dealers/distributors. Click on link below.

xlTRANSFER® unit (USB/RS232/McKenna Service Co.)

eNETDNC (DNC, Machine Monitoring/Port CNC Inc.)

eLAN (DNC, Machine Monitoring/McKenna Service Co.)

The xlTRANSFER. unit is used to transfer/drip feed part programs between a USB flash drive and a CNC control via RS232 port.

The xlTRANSFER. unit has the following features:

  • Works with just about any USB flash drive up to 4GB (1 GB included)
  • Battery operated (4 AA NiMh rechargeable batteries included)
  • Fully charged unit can continuously operate 8+ hours
  • For permanent hookup use charger only (included)
  • User friendly interface with 2 line LCD display and 20 key keypad. Keypad symbols can be 'rotated' for full character set.
  • Baud rate values: 300 to 115.2K
  • Xon/Xoff, CTS/RTS, MZK protocols
  • Up to 5 user defined and named setups, easily selectable before sending/receiving
  • Real time clock stamps received files with current date on the USB flash drive
  • File size and last modified date displayed before sending
  • User can also 'peek' into start of the file before sending to see the program number/comment
  • Drip feed if control is capable via RS232 port
  • Upgradeable firmware
  • Included: (1) xlTRANSFER® unit, (4) AA NiMh rechargeable batteries, (1) 110VAC wall-plug charger, (1) 1GB USB flash memory, (1) RJ45 to DB25M connector, (1) 6 feet cable
  • Made in USA.

  • Those members who are logged in can down load the xlTRANSFER® User Manual from the Downloads page
  • Latest firmware version: 1.29. To update your unit to the latest version, log in using your e-mail and password, go to the Downloads page, check out the PDF files at the bottom, and down load/install the update file.
  • You can pay using: (No gift cards please)

    Your IP Address is:
    Copyright © 2018 Log-In, Inc.. Powered by Zen Cart